Engineering accountability

About Kardex storage systems engineering

Kardex organizes vertical lift module, shuttle and dense AS/RS decisions around named owners, testable assumptions and lifecycle gates. Planning references in brand configuration—such as a 1990 seed year, 36 years of experience range, 1,000+ headcount or 61 countries served—are generated-range values and must not be published as verified corporate facts without source review.

Trust comes from a traceable method: state the basis, expose the limitation, test the representative task and give unresolved items a named owner before handover. Product SKU planning references of 2,500+ describe catalog breadth for RFQ conversations, not an inventory commitment at every site.

Kardex engineering team reviewing vertical storage interfaces
Responsibility matrix

Who owns each tray handshake

Commands, confirmations, timeouts and restart authority are assigned before steel drawings freeze. The matrix separates detection from authorization. Centralized WCS/WES can provide one operational view; modular controls can isolate failures—Kardex records which architecture the project selected and why.

BoundaryDetectsConfirmsMay restart
WMS ↔ WCSOrder wave / tray mission requestMission accepted with destination setWCS supervisor with WMS reconciliation
WCS ↔ PLCBay not ready / buffer blockedSensor and interlock stateControls engineer or named operator role
PLC ↔ EquipmentTray jam, E-stop, motor faultLocal HMI status wordMaintenance after lockout clearance
Goods-to-person bayMissing identity / confirmation timeoutStation controller handshakeBay owner under safety procedure
Test and commissioning path

Evidence strengthens from model to installed trays

01

Concept & data contract

Lock load units, SKU/order profile, peak window, destinations and unknown fields that require sensitivity tests. Rack load rating, aisle width and beam deflection assumptions are written with units.

02

Emulation

Exercise tray release timing, blocked destinations and lost confirms against PLC or WCS under a versioned signal dictionary. Digital twin or emulation cases are optional tools, not substitutes for site geometry.

03

FAT

Prove integrated software and equipment behavior under controlled conditions with agreed disturbance cases. Open deviations stay visible with owners and due dates.

04

SAT & handover

Validate installed geometry, actual loads, buffer starts and recovery procedures; close open items before ownership transfer. System availability is stated at subsystem and end-to-end levels with exclusions.

Service coverage

Support follows contracted project scope

Application, integration and documentation support are provided by project scope. The configuration lists a service network description of application, integration and documentation support—neither is a universal SLA nor a resident-service commitment across all geographies.

Functional safety frameworks such as performance level (PL) considerations may apply as engineering methods for guarded machines; they are not presented as held certificates for a specific model because the brand certifications list is empty.

Application engineering

Rate, accumulation, tray affinity and pick-face reviews against the operating profile and SKU velocity bands.

Controls integration

Interface matrices, emulation cases and FAT protocols for WMS/WCS/PLC boundaries and fieldbus or OPC UA links where specified.

Commissioning windows

Brownfield cutover plans with fallback pick paths, rollback triggers and inventory reconciliation steps.

Lifecycle documentation

Isolation sequences, critical spares lists, mean time to repair assumptions and restart evidence at handover.

FAT / SAT evidence rail

Four acceptance columns for Kardex storage programs

Design Rate

Order lines per hour or trays per hour with SKU mix, peak duration and accumulation assumptions stated.

Boundary: scenario-specific
FAT

Integrated software/equipment behavior under controlled loads and planned disturbances.

Evidence: signed protocol
SAT

Installed end-to-end flow with site geometry, actual loads and recovery observation.

Evidence: open-item register
Service Response

Isolation, spares and restart ownership documented before operational handover.

Evidence: handover pack
Standards note: certifications list is empty in brand assets. References such as ISO machinery-safety frameworks may apply as engineering methods; they are not presented as held certificates for a specific Kardex model.